| Bipolar Chopper/constant current technology |
Y |
| Automatic mixed current decay |
Y |
| Selectable step; Full, 1/2, 1/4, 1/8 step |
Y |
| Use single power supply for motor and drive |
Y |
| Step Inhibit Control |
Y |
| Physically compact |
Y |
|
A compact, microstepping chopper dirive for stepper motors that provides a cost effective solution for production volumes. Its ease of integration and small physical size allows for quick integration into your design.
The Whisper incorporates microstepping technology, a controller and runs off a single power supply. With eight microsteps per full step, the Whisper can smooth out cogging associated with stepper motors run in a full step mode. The drIve has a mixed current decay mode for reduced resonance and improved microstepping. Microstepping also reduces audible noise in the motor. The Whisper can be used with all HSI linear and rotary motors from 20 mm to 46 mm diameters.
Tech Data
Size: 2.65” x 2.55” x .86” (67.31 mm x 64.77 mm x 21.84 mm)
Power Requirement: 24-28 VDC power supply
Output Current: Up to 1 A/ø
Motor Coil Voltage: Bipolar, 5 VDC Only
Required External Step Pulse Range: Up to 8000 pps for 1000 full step
Micro Stepping: Up to 8 microsteps per full step
|
